97
MPLS L2VPN CONFIGURATION
COMMANDS
ccc interface in-label out-label
Syntax ccc ccc-connection-name interface interface-type interface-number in-label
in-label-value out-label out-label-value { nexthop ip-address | out-interface
interface-type interface-number } [ control-word | no-control-word ]
undo ccc ccc-connection-name
View System view
Parameter ccc-connection-name: Name for the CCC connection, a string of 1 to 20
characters. It is used for uniquely identifying a CCC connection on a PE.
interface-type interface-number: Specifies the interface connecting the local CE by
its type and number.
in-label-value: Incoming label, in the range 16 to 1023.
out-label-value: Outgoing label, in the range 16 to 1023.
nexthop ip-address: Specifies the IP address of the next hop.
out-interface interface-type interface-number: Specifies the outgoing interface
by its type and number.
control-word: Enables the control word option.
no-control-word: Disables the control word option.
Description Use the
ccc interface in-label out-label command to create a remote CCC
connection between CEs connected to different PEs.
Use the
undo ccc command to delete a CCC connection.
This command must be configured on both of the PEs.
A PE uses connection names to identify different CCC connections. A CCC
connection can have different names on different PEs.
If a P router is connected with a PE, you must configure a static LSPs between
them.
