2354 CHAPTER 155: FILE SYSTEM CONFIGURATION COMMANDS
A batch file does not support hot backup.
Each configuration command in a batch file must be a standard configuration
command, meaning the valid configuration information which can be displayed
with the display current-configuration command after this command is
configured successfully; otherwise, this command may not be executed correctly.
Example # Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
file prompt
Syntax file prompt {alert | quiet }
View System view
Parameter alert: Enables the system to warn you about operations that may bring
undesirable results such as file corruption or data loss.
quiet: Disables the system to warn you about any operation.
Description Use the
file prompt command to set a prompt mode for file operations.
By default, the prompt mode is alert.
Note that when the prompt mode is set to quiet, the system does not warn for
any file operation. To prevent undesirable consequents resulted from
misoperations, the alert mode is preferred.
Example # Set the file operation prompt mode to alert.
<Sysname> system-view
[Sysname] file prompt alert
fixdisk
Syntax fixdisk device
View User view
Parameter device: Storage device name.
Description Use the
fixdisk command to restore the space of a storage device when it
becomes unavailable because of some abnormal operation.
Example # Restore the space of the CF card.
