1612 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
View Interface view
Parameter None
Description Use the
mpls rsvp-te srefresh command to enable summary refresh.
Use the undo mpls rsvp-te srefresh command to restore the default.
By default, summary refresh is disabled.
Summary refresh (Srefresh) messages refresh path state and reservation state.
Enabling summary refresh disables conventional time-driven state refresh.
Example # Enable summary refresh on interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls rsvp-te srefresh
mpls rsvp-te timer graceful-restart recovery
Syntax mpls rsvp-te timer graceful-restart recovery recovery-time
undo mpls rsvp-te timer graceful-restart recovery
View MPLS view
Parameters recovery-time: RSVP-TE GR recovery interval in seconds, in the range 60 to 300.
Description Use the
mpls rsvp-te timer graceful-restart recovery command to set the
RSVP-TE GR recovery interval.
Use the
undo mpls rsvp-te timer graceful-restart recovery command to
restore the default.
By default, the RSVP-TE GR recovery interval is 300 seconds.
Examples # Set the RSVP-TE GR recovery interval to 100 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer graceful-restart recovery 100
mpls rsvp-te timer graceful-restart restart
Syntax mpls rsvp-te timer graceful-restart restart restart-time
undo mpls rsvp-te timer graceful-restart restart
View MPLS view
