2632 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS
number-priority
Syntax number-priority peer enable
undo number-priority peer
View Voice dial program view
Parameters None
Description Use the
number-priority peer enable command to match a number against a
voice entity match template first.
Use the
undo number-priority peer command to restore the default.
By default, a number starting with “*” or “#” will first match against a service
feature code.
Examples # Configure a number to first match against a voice entity match template.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] number-priority peer enable
number-substitute
Syntax number-substitute list-number
undo number-substitute { list-number | all }
View Voice dial program view
Parameter list-number: Serial number of a number substitution rule list, in the range of 1 to
2147483647.
all: Specifies all number substitution rule lists.
Description Use the
number-substitute command to create a number substitution rule list
and enter voice number-substitute view.
Use the
undo number-substitute command to remove a specified number
substitution rule or all number substitution rule lists.
By default, no number substitution rule list is configured.
Related command: rule and substitute (voice dial program view).
Example # Enter the voice dial program view and create a number substitution rule list.
