1621
mpls te cspf
Syntax mpls te cspf
undo mpls te cspf
View MPLS view
Parameter None
Description Use the
mpls te cspf command to enable CSPF on current node.
Use the undo mpls te cspf command to disable CSPF on current node.
By default, CSPF is disabled on current node.
Before enabling CSPF, enable MPLS TE in MPLS view.
CSPF provides an approach to path selection in MPLS domains. You must enable
CSPF before configuring other CSPF related functions.
Example # Enable CSPF.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls te cspf
mpls te cspf timer failed-link
Syntax mpls te cspf timer failed-link timer-interval
undo mpls te cspf timer failed-link
View MPLS view
Parameter timer-interval: Failed link timer setting, in the range 0 to 300 seconds. The default
is 10 seconds.
Description Use the
mpls te cspf timer failed-link command to configure the failed link
timer.
Use the
undo mpls te cspf timer failed-link command to restore the default.
Related command: mpls te cspf.
Example # Set the failed link timer to 50 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls te cspf timer failed-link 50
