1235
View Any view
Parameters None
Description Use the
display bgp ipv6 routing-table different-origin-as command to
display IPv6 BGP routes originating from different autonomous systems.
Examples # Display IPv6 BGP routes from different ASs.
<Sysname> display bgp ipv6 routing-table different-origin-as
BGP Local router ID is 10.1.4.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin:i-IGP, e - EGP, ? - incomplete
*> Network : 100:: PrefixLen : 64
NextHop : 1::1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 100 i
* Network : 100:: PrefixLen : 64
NextHop : 2::1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 300 i
Refer to Table 291 for description on the fields above.
display bgp ipv6 routing-table flap-info
Syntax display bgp ipv6 routing-table flap-info [ regular-expression as-regular-expression |
as-path-acl as-path-acl-number | ipv6-address [ prefix-length [ longer-match ]]]
View Any view
Parameters as-regular-expression: AS path regular expression to be matched.
as-path-acl-number: Number of the specified AS path ACL to be matched, ranging
from 1 to 256.
ipv6-address: IPv6 address of a route to be displayed.
prefix-length: Prefix length of the IPv6 address, in the range 1 to 128.
longer-match: Matches the longest prefix.
Description Use the display bgp ipv6 routing-table flap-info command to display IPv6
BGP route flap statistics.
Examples # Display IPv6 BGP route flap statistics.
