1987
Related command: reset stop-accounting-buffer, hwtacacs scheme, display
stop-accounting-buffer.
Example # In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting
requests getting no responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet (HWTACACS scheme view)
Syntax timer quiet minutes
undo timer quiet
View HWTACACS scheme view
Parameter minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and
defaults to 5.
Description Use the
timer quiet command to set the quiet timer for the primary server, that
is, the duration that the status of the primary server stays blocked before resuming
the active state.
Use the
undo timer quiet command to restore the default.
Related command: display hwtacacs.
Example # Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
timer realtime-accounting (HWTACACS scheme view)
Syntax timer realtime-accounting minutes
undo timer realtime-accounting
View HWTACACS scheme view
Parameter minutes: Real-time accounting interval in minutes. It is a multiple of 3 in the range
3 to 60 and defaults to 12.
Description Use the
timer realtime-accounting command to set the real-time accounting
interval.
