2295
enable
Syntax enable
undo enable
View NetStream aggregation view
Parameter None
Description Use the
enable command to enable current aggregation mode.
Use the
undo enable command to disable current aggregation mode.
By default, no aggregation mode is enabled.
Related command: ip netstream aggregation.
Example # Enable NetStream AS aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-aggregation-as] enable
ip netstream
Syntax ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
View Interface view
Table 604 Description on the fields of the display ip netstream export command
Field Description
Version 5 export information Statistics for exported version 5 statistics
packets
Stream source interface Source interface of exported UDP packets
Stream destination IP(UDP) Destination address and port number of
exported UDP packets
Exported stream number Number of exported streams
Exported UDP datagram number(failed number) Number of exported UDP packets (number
of failed sending attempts)
Version 8 AS aggregation export information Statistics for exported version 8 AS
aggregation UDP packets. Displayed only
when NetStream aggregation is enabled.
Version 8 tos-source-prefix export information Statistics for exported version 8 ToS-source
prefix aggregation packets
