2694 CHAPTER 177: H.323 CONFIGURATION COMMANDS
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2
gk-id
Syntax gk-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-id
View Gatekeeper client view
Parameter gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. The
default is 1719.
Description Use the
gk-id command to configure the primary gatekeeper for the gateway.
Use the undo gk-id command to remove the primary gatekeeper.
By default, no primary gatekeeper is specified for the gateway.
Only after you configure the information of the primary gatekeeper can the
gateway locate the gatekeeper for registration.
Related command: area-id, gw-id, gk-2nd-id, gw-address, ras-on.
Example # Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center,
and RAS port to the default.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
gk-security call enable
Syntax gk-security call enable
undo gk-security call enable
View Gatekeeper client view
Parameter None
Description Use the
gk-security call enable command to enable security calling on the
voice gateway.
