127
AAA CONFIGURATION COMMANDS
access-limit
Syntax access-limit { disable | enable max-user-number }
undo access-limit
View ISP domain view
Parameter disable: Specifies that the system does not limit the number of accessing users in
the current ISP domain.
enable max-user-number: Specifies that the system limits the number of accessing
users in the current ISP domain. max-user-number is the maximum number of
accessing users in the current ISP domain. The valid range is from 1 to 1024.
Description Use the
access-limit enable command to set the maximum number of
accessing users allowed by an ISP domain.
Use the
undo access-limit or access-limit disable command to remove the
limitation.
By default, there is no limit to the amount of supplicants in an ISP domain.
As the supplicants may compete for network resources, setting a proper limit to
the amount of accessing users helps in providing a reliable system performance.
Example # Set a limit of 500 supplicants for ISP domain aabbcc.net.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] access-limit enable 500
accounting default
Syntax accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none
| radius-scheme radius-scheme-name [ local ]}
undo accounting default
View ISP domain view
