2346 CHAPTER 154: SNMP CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] snmp-agent trap if-mib link extended
snmp-agent trap life
Syntax snmp-agent trap life seconds
undo snmp-agent trap life
View System view
Parameter seconds: Time-out time, in the range 1 to 2,592,000 seconds.
Description Use the
snmp-agent trap life command to configure the life time for Traps,
which will be discarded when their life time expires.
Use the
undo snmp-agent trap life command to restore the default life time
for Trap packets.
By default, the life time for SNMP Traps is 120 seconds.
Related command: snmp-agent trap enable, snmp-agent target-host.
Example # Configure the life time for Trap packets as 60 seconds.
<Sysname> system-view
[Sysname] snmp-agent trap life 60
snmp-agent trap queue-size
Syntax snmp-agent trap queue-size size
undo snmp-agent trap queue-size
View System view
Parameter size: The queue size for the Trap messages, in the range 1 to 1,000.
Description Use the
snmp-agent trap queue-size command to configure the size of the
Trap queue.
Use the
undo snmp-agent trap queue-size command to restore the default
queue size.
By default, up to 100 Trap messages can be stored in the Trap queue.
Related command: snmp-agent trap enable, snmp-agent target-host, snmp-agent trap life.
