843
display udp ipv6 statistics
Syntax display udp ipv6 statistics
View Any view
Parameter None
Description Use the
display udp ipv6 statistics command to display statistics of UDP
packets.
Example # Display statistics information of UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 181 Description on fields of the display tcp ipv6 status command
Field Description
TCP6CB IPv6 address of the TCP control block (hexadecimal)
Local Address Local IPv6 address
Foreign Address Remote IPv6 address
State IPv6 TCP connection status, including
■ Closed
■ Listening
■ Syn_Sent
■ Syn_Rcvd
■ Established
■ Close_Wait
■ Fin_Wait1
■ Closing
■ Last_Ack
■ Fin_Wait2
■ Time_Wait
Table 182 Description on fields of the display udp ipv6 statistics command
Field Description
Total Total number of received/sent packets
checksum error Total number of packets with a checksum error
