2436 CHAPTER 163: INFORMATION CENTER CONFIGURATION COMMANDS
Description Use the info-center logfile frequency command to configure the frequency
with which the system saves the log file.
Use the
undo info-center logfile frequency command to restore the default
frequency.
By default, the frequency with which the system saves the log file varies with
devices.
n
The support for the command varies with devices.
Example # Configure the frequency with which the system saves the log file as 60,000
seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
info-center logfile size-quota
Syntax info-center logfile size-quota size
undo info-center logfile size-quota
View System view
Parameter size: The maximum capacity of a disk, in MB, the default range varies with devices.
The value, however, cannot be smaller than 1MB and larger than 10 MB.
Description Use the
info-center logfile size-quota command to set the maximum storage
space reserved for a log file.
Use the
undo info-center logfile size-quota command to restore the default
maximum storage space reserved for a log file.
By default, the storage space reserved for a log file varies with devices.
n
The support for the command varies with devices.
Example # Set the maximum storage space reserved for a log file to 6 MB.
<Sysname> system-view
[Sysname] info-center logfile size-quota 6
info-center logfile switch-directory
Syntax info-center logfile switch-directory dir-name
View System view
