2547
undo ipx sap mtu
View Interface view
Parameter bytes: Maximum SAP packet size in bytes, ranging from 480 to 1,500.
Description Use the
ipx sap mtu command to configure the maximum size of SAP updating
packets.
Use the
undo ipx sap mtu command to restore the default.
By default, the value is 480 bytes. The size of the IPX header plus SAP header is 32
bytes, so a 480-byte SAP updating packet contains 7 service information items (64
bytes each).
Example # Set the maximum size of SAP updating packets on the interface Ethernet1/0 to
674 bytes (10 service information items at most).
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx sap mtu 674
ipx sap multiplier
Syntax ipx sap multiplier multiplier
undo ipx sap multiplier
View System view
Parameter multiplier: Value multiplied by the updating interval to yield the aging interval for
SAP service information items. The value ranges from 1 to 1000.
Description Use the
ipx sap multiplier command to configure the aging interval of SAP
service information items.
Use the
undo ipx sap multiplier command to restore the default.
The default aging time is three times the IPX SAP update interval.
Related command: ipx sap timer update.
Example # Set the aging interval of SAP service information items to be 5 times the
updating interval.
<Sysname> system-view
[Sysname] ipx sap multiplier 5
