734 CHAPTER 52: DHCP RELAY AGENT CONFIGURATION COMMANDS
Use the undo dhcp relay security tracker command to restore the default
interval.
The default handshake interval is auto, the value of 60 seconds divided by the
number of binding entries.
Example # Set the handshake interval as 100 seconds.
<Sysname> system-view
[Sysname] dhcp relay security tracker 100
dhcp relay server-detect
Syntax dhcp relay server-detect
undo dhcp relay server-detect
View System view
Parameter None
Description Use the
dhcp relay server-detect command to enable pseudo DHCP server
detection.
Use the
undo dhcp relay server-detect command to disable pseudo DHCP
server detection.
By default, pseudo DHCP server detection is disabled.
Example # Enable pseudo DHCP server detection.
<Sysname> system-view
[Sysname] dhcp relay server-detect
dhcp relay server-group
Syntax dhcp relay server-group group- ip ip-address
undo dhcp relay server-group group-id [ ip ip-address ]
View System view
Parameter group-id: Specifies a DHCP server group number, in the range of 0 to 19.
ip ip-address: Specifies a DHCP server IP address.
Description Use the
dhcp relay server-group command to specify a DHCP server for a
DHCP server group.
