911
Use the undo print menu command to disable the printing of terminal menu
information.
By default, terminal menu information is printed.
This command takes effect only in TTY and Telnet terminal access. Make sure you
enable the router to print characters on the terminal before using this command.
Related command: print information.
Example # Enable the printing of terminal menu information on the terminal
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] print menu
print language
Syntax print language { chinese | english }
View Terminal template view
Parameters chinese: Prints prompt information in Chinese.
english: Prints prompt information in English.
Description Use the
print language command to set the language of the printed prompt
information.
By default, the prompt information is printed in Chinese on the terminal.
Example # Set the language of the prompt information printed on the terminal to English.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] print language english
redrawkey
Syntax redrawkey ascii-code&<1-3>
undo redrawkey
View Terminal template view
Parameters ascii-code&<1-3>: ASCII value of hotkey, ranging 1 to 255. “&<1-3>” means that
you can provide up to three ASCII values.
Description Use the
redrawkey command to set the hotkey for terminal redrawing.
