2106 CHAPTER 139: IPV6 ACL CONFIGURATION COMMANDS
Description Use the acl ipv6 name command to enter the view of an existing IPv6 ACL by
specifying its name.
Example # Enter the view of the IPv6 ACL named flow.
<Sysname> system-view
[Sysname] acl ipv6 name flow
[Sysname-acl6-basic-2002-flow]
description (for IPv6)
Syntax description text
undo description
View Basic IPv6 ACL view, advanced IPv6 ACL view, simple IPv6 ACL view
Parameter text: ACL description, a case-sensitive string of 1 to 127 characters.
Description Use the
description command to create an IPv6 ACL description, to describe the
purpose of the ACL for example.
Use the
undo description command to remove the IPv6 ACL description.
By default, an IPv6 ACL has no description configured.
Example # Create a description for IPv6 ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] description This acl is used in eth 0
# Create a description for IPv6 ACL 3000.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] description This acl is used in eth 0
# Create a description for IPv6 ACL 10000.
<Sysname> system-view
[Sysname] acl ipv6 number 10000
[Sysname-acl6-simple-10000] description This acl is used in eth 0
display acl ipv6
Syntax display acl ipv6 { acl6-number | all | name acl6-name }
View Any view
Parameter acl6-number: IPv6 ACL number. It is a value in one of the following ranges:
