2556 CHAPTER 173: VOIP CONFIGURATION COMMANDS
Example # Set the number of busy tone periods to 3.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] busytone-t-th 3
cid display
Syntax cid display
undo cid display
View Analog FXS voice subscriber line view
Parameter None
Description Use the
cid display command to enable caller identity delivery (CID) on an
analog FXS voice subscriber line.
Use the
undo cid display command to disable CID.
By default, CID is enabled on an analog FXS voice subscriber line.
Example # Enable CID on voice subscriber line 1/0.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] cid display
cid receive
Syntax cid receive
undo cid receive
View Analog FXO voice subscriber line view
Parameter None
Description Use the
cid receive command to enable CID.
Use the undo cid enable command to disable CID.
By default, CID is enabled.
When CID is disabled, the local FXO interface does the following when the calling
party sends a calling number:
