800 CHAPTER 60: IP PERFORMANCE CONFIGURATION COMMANDS
Parameter None
Description Use the
reset tcp statistics command to clear statistics of TCP traffic.
Related command: display tcp statistics.
Example # Display statistics of TCP traffic.
<Sysname> reset tcp statistics
reset udp statistics
Syntax reset udp statistics
View User view
Parameter None
Description Use the
reset udp statistics command to clear statistics of UDP traffic.
Example # Display statistics of UDP traffic.
<Sysname> reset udp statistics
tcp anti-naptha enable
Syntax tcp anti-naptha enable
undo tcp anti-naptha enable
View System view
Parameter None
Description Use the
tcp anti-naptha enable command to enable the protection against
Naptha attack.
Use the
undo tcp anti-naptha enable command to disable the protection
against Naptha attack.
By default, the protection against Naptha attack is disabled.
Note that the configurations of the tcp state and tcp timer check-state
command will be deleted after the protection against Naptha attack is disabled.
n
The support for this command varies with devices.
