840 CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS
display tcp ipv6 statistics
Syntax display tcp ipv6 statistics
View Any view
Parameter None
Description Use the
display tcp ipv6 statistics command to display TCP connection
statistics.
Example # Display the statistics of IPv6 TCP connections.
<Sysname> display tcp ipv6 statistics
Received packets:
Total: 0
packets in sequence: 0 (0 bytes)
window probe packets: 0, window update packets: 0
checksum error: 0, offset error: 0, short error: 0
duplicate packets: 0 (0 bytes), partially duplicate packets: 0 (0 bytes)
Received packets:
Total: 0
checksum error: 0 too
short: 0
bad code 0
unreached: 0 too big: 0
hopcount exceeded: 0
reassembly timeout: 0
parameter problem: 0
unknown error type: 0
echoed: 0 echo replied: 0
neighbor solicit: 0 neighbor
advert: 0
router solicit: 0 router
advert 0
redirected: 0
router renumbering 0
unknown info type: 0
Deliver failed:
bad length: 0 ratelimited: 0
Statistics of received ICMPv6 packets, including
■ Total number of received packets
■ Number of packets with checksum errors
■ Number of too small packets
■ Number of packets with error codes
■ Number of packets whose destination is unreachable
■ Number of too large packets
■ Number of packets exceeding the hop limit
■ Number of packets whose fragmentation and reassembly
times out
■ Number of packets with parameter errors
■ Number of packets with unknown errors
■ Number of request packets
■ Number of response packets
■ Number of neighbor solicitation messages
■ Number of neighbor advertisement packets
■ Number of router solicitation packets
■ Number of router advertisement packets
■ Number of redirected packets
■ Number of packets recounted by the router
■ Number of unknown type of packets
■ Number of packets with a incorrect size
■ Number of packets failing to be received because of rate
limitation
Table 179 Description on fields of the display ipv6 statistics command
Field Description
