1935
display local-user
Syntax display local-user [ idle-cut { disable | enable } | service-type { dvpn | ftp |
lan-access | pad | ppp | ssh | telnet | terminal } | state { active | block } | user-name
user-name | vlan vlan-id ]
View Any view
Parameter idle-cut { disable | enable }: Specifies local users with the idle cut function
disabled or enabled.
service-type: Specifies the local users of a type.
■ dvpn refers to users using DVPN tunnel,
■ ftp refers to users using FTP,
■ lan-access refers to users accessing the network through an Ethernet, such as
802.1x users,
■ pad refers to users using x.25 PAD,
■ ppp refers to users using PPP,
■ ssh refers to users using SSH,
■ telnet refers to users using Telnet,
■ terminal refers to users logging in through the console port, AUX port, or
Asyn port.
state { active | block }: Specifies all local users in the state of active or block. A
local user in the state of active can access network services, while a local user in
the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The
username is a case-sensitive string of 1 to 55 characters and does not contain the
domain name.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to
4094.
Description Use the
display local-user command to display information about specified or
all local users.
Related command: local-user.
Domain User Template Template for users in the domain
Idle-cut Whether idle cut is enabled
Self-service Whether self service is enabled
Total 2 domain(s). 2 ISP domains in total
Table 508 Description on the fields of the display domain command
Field Description
