A SERVICE OF

logo

90
PIM CONFIGURATION COMMANDS
auto-rp enable
Syntax auto-rp enable
undo auto-rp enable
View Public instance PIM view, VPN instance PIM view
Parameter None
Description Use the
auto-rp enable command to enable auto-RP.
Use the
undo auto-rp enable command to disable auto-RP.
By default, auto-RP is disabled.
Related command: static-rp (PIM view).
Example # Enable auto-RP in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] auto-rp enable
bsr-policy (PIM view)
Syntax bsr-policy acl-number
undo bsr-policy
View Public instance PIM view, VPN instance PIM view
Parameter acl-number: Basic ACL number, in the range of 2000 to 2999. When an ACL is
defined, the source keyword in the rule command specifies a legal BSR source
address range.
Description Use the
bsr-policy command to configure a legal BSR address range to guard
against BSR spoofing.