2411
Description Use the display clipboard command to view the contents of the clipboard.
To copy the specified content to the clipboard:
■ Move the cursor to the starting position of the content and press the
<Esc+Shift+,> combination (“,” is an English comma).
■ Move the cursor to the ending position of the content and press the
<Esc+Shift+.> combination (“,” is an English dot) to copy the specified content
to the clipboard.
Example # View the content of the clipboard.
<Sysname> display clipboard
---------------- CLIPBOARD-----------------
ip route 10.1.0.0 255.0.0.0 eth 0
display clock
Syntax display clock
View Any view
Parameter None
Description Use the
display clock command to view the current system time and date.
The current system time and date are decided by the clock datetime, clock
summer-time one-off (or clock summer-time repeating), clock timezone.
Refer to the Configuring the system clock section in the operation manual for the
detailed rules.
Related command: clock datetime, clock summer-time one-off, clock summer-time repeating,
clock timezone.
Example # Display the current time and date.
<Sysname> display clock
09:41:23 UTC Thu 12/15/2005
display configure-user
Syntax display configure-user
View Any view
Parameter None
Description Use the
display configure-user command to display the users entering system
view at the same time.
