2042 CHAPTER 133: NAT CONFIGURATION COMMANDS
userlog nat export version
Syntax userlog nat export version version-number
undo userlog nat export version
View System view
Parameter version-number: Version number of NAT logs. Currently, the system supports
version 1 only.
Description Use the
userlog nat export version command to set the version number of
NAT logs.
Use the
undo userlog nat export version command to restore the default.
By default, the version number of NAT logs is 1.
Example # Set the version number of NAT logs to 1.
<Sysname> system-view
[Sysname] userlog nat export version 1
userlog nat syslog
Syntax userlog nat syslog
undo userlog nat syslog
View System view
Parameter None
Description Use the
userlog nat syslog command to export NAT logs to the information
center.
Use the
undo userlog nat syslog command to restore the default.
By default, NAT logs are exported to the NAT log server.
Note that as NAT logs may occupy large memory, it is not advisable to export large
amount of NAT logs to the information center.
Example # Export NAT logs to the information center.
<Sysname> system-view
[Sysname] userlog nat syslog
