2260 CHAPTER 148: DEVICE MANAGEMENT COMMANDS
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait
......
This command will reboot the device. Current configuration will be lost in next
startup if you continue. Continue? [Y/N]:y
This will reboot device. Continue? [Y/N]:y
#Nov 20 12:00:42:698 2006 Sysname COMMONSY/4/REBOOT:
Reboot device by command.
%Nov 20 12:00:42:699 2006 Sysname DEV/4/SYSTEM REBOOT:
System is rebooting now.
Now rebooting, please wait...
remove
Syntax remove slot slot-number
View User view
Parameter slot slot-number: Specifies the slot number of a card. The value range varies with
devices.
Description Use the
remove command to remove a card.
n
This command is supported only on MSR 50 series routers.
c
CAUTION:
■ This command may cause a card unusable, thus resulting in service
interruption. Use it with caution.
■ Use the remove slot command to remove a card before hot swapping it;
otherwise the device or the card may be broken.
Example # Remove card 8.
<Sysname>remove slot 8
You can not configure the slot now.
Please wait...
You can remove the card now.
reset unused porttag
Syntax reset unused porttag
View User view
Parameter None
Description Use the
reset unused porttag command to clear the 16-bit index saved but not
used in the current system.
