2575
Use the undo description command to delete the voice entity description string.
By default, no description is configured for the voice entity.
You can use the description command to add a description to a voice entity,
which has no effect on the performance of the voice entity interface. You can view
this description with the display command.
Example # Add the description local-entity 10 to voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] description local-entity10
description (voice subscriber line view)
Syntax description text
undo description
View FXS/FXO/E&M voice subscriber line view
Parameter text: Description string of voice subscriber line, consisting of up to 80 characters.
Description Use the
description command to configure a subscriber line description string.
Use the undo description command to delete the description.
By default, no description is configured for the voice subscriber line.
You can use the description command to add a description to a voice subscriber
line, which has no effect on the performance of the voice entity. You can view this
description with the display command.
Example # Mark voice subscriber line 1/0 as lab_1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] description lab_1
dial-program
Syntax dial-program
View Voice view
Parameter None
