2545
View Interface view
Parameter None
Description Use the
ipx sap disable command to disable IPX SAP on the current interface.
Use the
undo ipx sap disable command to enable IPX SAP on the current
interface.
By default, the SAP is enabled on the interface after IPX is enabled.
Example # Disable SAP on the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx sap disable
ipx sap gns-disable-reply
Syntax ipx sap gns-disable-reply
undo ipx sap gns-disable-reply
View Interface view
Parameter None
Description Use the
ipx sap gns-disable-reply command to disable the interface from
responding to IPX GNS requests.
Use the
undo ipx sap gns-disable-reply command to enable the interface to
respond to IPX GNS requests.
By default, an interface is capable of responding to GNS requests.
Example # Disable Ethernet 1/0 from responding to IPX GNS requests.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx sap gns-disable-reply
ipx sap gns-load-balance
Syntax ipx sap gns-load-balance
undo ipx sap gns-load-balance
View System view
