2548 CHAPTER 172: IPX CONFIGURATION COMMANDS
ipx sap timer update
Syntax ipx sap timer update seconds
undo ipx sap timer update
View System view
Parameter seconds: SAP updating interval, ranging from 10 to 60,000 seconds.
Description Use the
ipx sap timer update command to specify the IPX SAP updating
interval.
Use the
undo ipx sap timer update command to restore the default.
By default, the update interval is 60 seconds.
Using this command does not take effect on an interface that adopts triggered
update.
Related command: ipx sap multiplier, ipx update-change-only.
Example # Specify the SAP updating interval as 300 seconds.
<Sysname> system-view
[Sysname] ipx sap timer update 300
ipx service
Syntax ipx service service-type server-name network.node socket hop hopcount [ preference
preference ]
undo ipx service { service-type [server-name [ network.node ]] [preference
preference] | all }
View System view
Parameter service-type: Service type, ranging from 0 to 0xFFFF. A value of 0 indicates all
service types.
server-name: Name of the server which provides the service, a string of 1 to 47
characters.
network.node: Network ID and node ID of a server. Network ID is an 8-bit
hexadecimal number, ranging from 0x1 to 0xFFFFFFFD. Node ID has a length of 48
bits, represented by a triplet of 4-digit hexadecimal numbers separated by “-”.
Leading 0s can be omitted.
socket: It is a 4-bit hexadecimal number, ranging from 0x1 to 0xFFFF.
