2391
159
TFTP CLIENT CONFIGURATION
COMMANDS
display tftp client configuration
Syntax display tftp client configuration
View Any view
Parameter None
Description Use the
display tftp client configuration command to display the
configuration information of the TFTP client.
Related command: tftp client source.
Example # Display the current configuration information of the TFTP client.
<Sysname> display tftp client configuration
The source IP address is 192.168.0.123
n
Currently this command displays the source address configuration information. If
the currently valid source address is the source IP address, the configured source IP
address is displayed; if the currently valid address is the source interface, the
configured source interface is displayed.
tftp-server acl
Syntax tftp-server [ ipv6 ] acl acl-number
undo tftp-server [ ipv6 ] acl
View System view
Parameter ipv6: References an IPv6 ACL. If it is not specified, an IPv4 ACL is referenced.
acl-number: Number of basic ACL, in the range 2000 to 2999.
