1534 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
Example # Display brief information about static LSPs.
<Sysname> display mpls static-lsp
Name FEC I/O Label I/O If State
lsp1 3.3.3.9/32 NULL/100 -/Eth1/0 Up
# Display detailed information about static LSPs.
<Sysname> display mpls static-lsp verbose
No : 1
LSP-Name : lsp1
LSR-Type : Ingress
FEC : 3.3.3.9/32
In-Label : NULL
Out-Label : 100
In-Interface : -
Out-Interface : Ethernet1/0
NextHop : 30.1.1.2
Static-Lsp Type: IPTN
Lsp Status : Up
display mpls statistics interface
Syntax display mpls statistics interface { interface-type interface-number | all }
View Any view
Table 384 Description on the fields of the display mpls static-lsp command
Field Description
Name Name of the LSP
FEC Forwarding equivalence class
I/O Label Incoming/outgoing label
I/O If Incoming/outgoing interface
Stat Status of the LSP
Table 385 Description on the fields of the display mpls static-lsp verbose command
Field Description
No Sequence number
LSP-Name Name of the LSP
LSR-Type Role of the LSR for the LSP, which can be ingress, egress, or
transit
FEC Forwarding equivalence class
In-Label Incoming label
Out-Label Outgoing label
In-Interface Incoming interface
Out-Interface Outgoing interface
NextHop Address of the next hop
Static-Lsp Type Type of the static LSP
Lsp Status Status of the LSP
