2426 CHAPTER 163: INFORMATION CENTER CONFIGURATION COMMANDS
The above information indicates to output log information with the severity from
0 to 4, trap information with the severity from 0 to 7 and debug information with
the severity from 0 to 7 to the console. The source module is default.
display info-center
Syntax display info-center
View Any view
Parameter None
Description Use the
display info-center command to display configurations for all channels
(except channel 6 to 8) of the information center.
Example # Display configurations for all channels.
<Sysname> display info-center
Information Center:enabled
Log host:
2.2.2.2, channel number : 8, channel name : channel8,
host facility local7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 512,
current messages 512, dropped messages 0, overwritten messages 740
channel number : 4, channel name : logbuffer
Trap buffer:
channel name A specified channel name, which varies with user’s configuration. For
more information, refer to “info-center channel name” on page 2432.
MODU_ID The ID of the module to which the information permitted through the
current channel belongs
NAME The name of the module to which the information permitted through
the current channel belongs
Default means all modules are allowed to output system information,
but the module type varies with devices.
ENABLE Indicates whether to enable or disable the output of log information,
which could be Y or N.
LOG_LEVEL The severity of log information, refer to Table 627 for details.
ENABLE Indicates whether to enable or disable the output of trap information,
which could be Y or N.
TRAP_LEVEL The severity of trap information, refer to Table 627 for details.
ENABLE Indicates whether to enable or disable the output of debug
information, which could be Y or N.
DEBUG_LEVEL The severity of debug information, refer to Table 627 for details.
Table 625 Description on the fields of the display channel command
Field Description
