932 CHAPTER 71: IP ROUTING TABLE COMMANDS
Destination: 127.0.0.0/8
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h00m36s
Tag: 0
Destination: 127.0.0.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 00h00m36s
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed
description of each route (in sequence).
display ip routing-table acl
Syntax display ip routing-table acl acl-number [ verbose ]
View Any view
Parameters acl-number: Basic ACL number, in the range of 2000 to 2999.
Table 203 Description on the fields of the display ip routing-table verbose command
Field Description
Destination Destination address/mask length
Protocol Protocol that presents the route
Process ID Process ID
Preference Priority of the route
Cost Cost of the route
NextHop Address of the next hop on the route
Interface Outbound interface for packets to be forwarded along the route
RelyNextHop The next hop address obtained through routing stack.
Neighbour Neighboring address determined by Routing Protocol
Tunnel ID Tunnel ID
Label Label
State Status of the route, which could be Active, Inactive, Adv, or NoAdv.
Age Time that the route has been in the routing table, in the sequence of
hour, minute, and second from left to right.
Tag Route tag
