1054 CHAPTER 74: IS-IS CONFIGURATION COMMANDS
LSP Source ID: No. of used LSPs
0000.0000.0002 001
domain-authentication-mode
Syntax domain-authentication-mode { simple | md5 } password [ ip | osi ]
undo domain-authentication-mode
View IS-IS view
Parameters simple: Specifies to send the password in plain text.
md5: Specifies to send the password encrypted with MD5.
password: Specifies a password. For simple authentication mode, the password
must be plain text. For md5 authentication mode, the password can be either
plain text or cipher text. A plain text password is a string of up to 16 characters,
such as user918. A cipher password must be a string of 24 characters, such as
_(TT8F]Y5SQ=^Q‘MAF4<1!!.
ip: Specifies to check the IP related fields in a LSP.
Table 242 Description on the fields of the display isis statistics command
Field Description
Statistics information for ISIS(processid) Statistics for the ISIS process
Level-1 Statistics Level-1 Statistics
Level-2 Statistics Level-2 Statistics
Learnt routes information Number of learnt IPv4 routes
Number of learnt IPv6 routes
Imported routes
information
IPv4 Imported
Routes
Redistributed IPv4 routes
■ Static
■ Direct
■ ISIS
■ BGP
■ RIP
■ OSPF
IPv6 Imported
Routes
Redistributed IPv6 routes
■ Static
■ Direct
■ ISISv6
■ BGP4+
■ RIPng
■ OSPFv3
Lsp information LSP information
■ LSP Source ID: ID of the source system
■ No. of used LSPs: number of used LSPs
