1843
119
PORT PRIORITY CONFIGURATION
COMMANDS
qos priority
Syntax qos priority priority-value
undo qos priority
View Ethernet interface view/port group view
Parameters priority-value: Port priority value, in the range 0 to 7. The default value is 0.
Description Use the
qos priority command to configure the port priority of current port.
Use the undo qos priority command to restore to the default value.
Port group is supported if the number of the interfaces on a layer 2 module is 16,
24 or 48.
Execute the command in interface view, and the setting is effective on the current
interface only. Execute the command in interface group view, and the setting is
effective on all interfaces in the interface group.
Examples # Configure the Ethernet 1/0 priority to 2.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] qos priority 2
