1654 CHAPTER 97: MPLS L2VPN CONFIGURATION COMMANDS
Remote ccc vc : 1, 0 up
***Name : c1
Type : remote
State : down
Intf : Serial2/0 (up)
In-label : 100
Out-label : 200
Nexthop : 20.1.1.1
display l2vpn ccc-interface vc-type
Syntax display l2vpn ccc-interface vc-type { all | bgp-vc | ccc | ldp-vc | static-vc } [ up |
down ]
View Any view
Parameter all: Specifies interfaces of any encapsulation types.
bgp-vc: Specifies interfaces of Kompella L2VPN VCs.
ccc: Specifies interfaces of CCC L2VPN VCs.
ldp-vc: Specifies interfaces of Martini L2VPN VCs.
static-vc: Specifies interfaces of SVC L2VPN VCs.
up: Specifies CCC interfaces in the state of UP.
down: Specifies CCC interfaces in the state of DOWN.
Description Use the
display l2vpn ccc-interface vc-type command to display information
about specified L2VPN VC interfaces.
Example # Display information about interfaces of any encapsulation types.
<Sysname> display l2vpn ccc-interface vc-type all
Total ccc-interface of CCC VC: 3
Table 427 Description on the fields of the display ccc command
Field Description
Total ccc vc Total number of CCC connections
Local ccc vc Number of local CCC connections
Remote ccc vc Number of remote CCC connections
Name Name of the CCC connection
Type Type of the CCC connection
State Status of the CCC connection
Intf Interface of the CCC connection
In-label Incoming label
Out-label Outgoing label
Nexthop IP address of the next hop
