1892 CHAPTER 125: FR QOS CONFIGURATION COMMANDS
Examples # Enable FRTS on the serial interface Serial 1/0.
<Sysname> system-view
[Sysname] interface Serial1/0
[Sysname-Serial1/0] fr traffic-shaping
fragment
Syntax fragment [ fragment-size ]
undo fragment [ fragment-size ]
View Frame relay class view
Parameters fragment-size: Size of a fragment, in byte, ranging from 16 to 1600. By default,
the fragment size is of 45 bytes.
Description Use the
fragment command to enable the FRF.12-compliant fragmentation
function on FR virtual circuit.
Use the
undo fragment command to disable this function.
By default, the fragmentation function on FR virtual circuit is disabled.
Related commands: fr class.
Examples # Configure fragment size as 128 in the FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment 128
fr-class
Syntax fr-class class-name
undo fr-class class-name
View Frame relay DLCI view/Frame relay interface view
Parameters class-name: Name of a FR class, a string of 1 to 30 characters.
Description Use the
fr-class command to associate a FR class with the current FR virtual circuit
or FR interface.
Use the
undo fr-class command to remove the association between a FR class
and the FR virtual circuit or FR interface.
By default, there is no association between a FR class and the FR virtual circuit or
FR interface.
