1486 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS
pim ipv6 hello-option dr-priority
Syntax pim ipv6 hello-option dr-priority priority
undo pim ipv6 hello-option dr-priority
View Interface view
Parameter priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Description Use the
pim ipv6 hello-option dr-priority command to configure the router
priority for DR election on the current interface.
Use the
undo pim ipv6 hello-option dr-priority command to restore the
default setting.
By default, the router priority for DR election is 1.
Related command: hello-option dr-priority (IPv6 PIM view).
Example # Set the router priority for DR election to 3 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option dr-priority 3
pim ipv6 hello-option holdtime
Syntax pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
View Interface view
Parameter interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1
to 65,535.
Description Use the
pim ipv6 hello-option holdtime command to configure the PIM
neighbor timeout time on the current interface.
Use the
undo pim ipv6 hello-option holdtime command to restore the
default setting.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related command: hello-option holdtime (IPv6 PIM view).
