1999
131
ASPF CONFIGURATION COMMANDS
aging-time
Syntax aging-time { syn | fin | tcp | udp } seconds
undo aging-time { syn | fin | tcp | udp }
View ASPF policy view
Parameter syn: Specifies that the TCP session will be terminated seconds seconds after a SYN
is detected if the session fails to reach the established state.
fin: Specifies that the TCP session will be terminated seconds seconds after a FIN is
detected.
tcp: Specifies, together with the seconds argument, the idle timeout of a TCP
session.
udp: Specifies, together with the seconds argument, the idle timeout of a UDP
"session".
seconds: Idle timeout period of the session, in seconds. The effective range is 5 to
43,200.
Description Use the
aging-time command to configure the SYN/FIN wait timeout period of a
TCP session or the idle timeout period of a TCP session/UDP "session".
Use the
undo aging-time command to restore the inactivity timeout period to
the default value.
By default, the SYN, FIN, TCP and UDP timeout period values are 30, 5, 3,600 and
30 seconds respectively.
Within the timeout period, the system maintains the established session.
Related command: display aspf all, display aspf policy, display aspf session, and display aspf
interface.
Example # Create an ASPF policy, the number of which is 1.
<Sysname> system-view
[Sysname] aspf-policy 1
