2144 CHAPTER 140: IPSEC CONFIGURATION COMMANDS
View User view
Parameter integer: ID of the IPSec tunnel, in the range1 to 2,000,000,000.
Description Use the
reset ipsec session command to clear the sessions of a specified or all
IPSec tunnels.
Related command: display ipsec session.
Example # Clear all IPSec sessions.
<Sysname> reset ipsec session
# Clear the sessions of IPSec tunnel 5.
<Sysname> reset ipsec session tunnel-id 5
reset ipsec statistics
Syntax reset ipsec statistics
View User view
Parameter None
Description Use the
reset ipsec statistics command to clear IPSec message statistics, and
set all the statistics to zero.
Related command: display ipsec statistics.
Example # Clear IPSec message statistics.
<Sysname> reset ipsec statistics
sa authentication-hex
Syntax sa authentication-hex { inbound | outbound } { ah | esp } hex-key
undo sa authentication-hex { inbound | outbound } { ah | esp }
View IPSec policy view
Parameter inbound: Specifies the inbound SA through which IPSec processes the received
packets.
outbound: Specifies the outbound SA through which IPSec process the sent
packets.
