62
UDP HELPER CONFIGURATION
COMMANDS
display udp-helper server
Syntax display udp-helper server [ interface interface-type interface-number ]
View Any view
Parameter interface interface-type interface-number: Displays information of forwarded
UDP packets on the specified interface.
Description Use the
display udp-helper server command to display the information of
forwarded UDP packets on the specified interface or all interfaces.
If interface-type interface-number is not specified, this command displays the
information of forwarded UDP packets on all interfaces.
Example # Display the information of forwarded UDP packets on the interface Ethernet1/0.
<Sysname> display udp-helper server interface ethernet 1/0
Interface name Server address Packets sent
Ethernet1/0 192.1.1.2 0
The information above shows that the IP address of the destination server
corresponding to the interface Ethernet 1/0 is 192.1.1.2, and that no packets are
forwarded to the destination server.
reset udp-helper packet
Syntax reset udp-helper packet
View User view
Parameter None
Description Use the
reset udp-helper packet command to clear the statistics of UDP
packets forwarded.
Related command: display udp-helper server.
Example # Clear the statistics of the forwarded UDP packets.
