1593
1.1.1.9:1024 ---/Eth1/0 7/7 0 0
1.1.1.9:2048 ---/Eth1/1 7/7 0 0
display mpls te link-administration bandwidth-allocation
Syntax display mpls te link-administration bandwidth-allocation [ interface interface-type
interface-number ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and a
number.
Description Use the
display mpls te link-administration bandwidth-allocation
command to display bandwidth allocation on the specified or all MPLS TE enabled
interfaces.
Example # Display bandwidth allocation on MPLS TE enabled interfaces.
<Sysname> display mpls te link-administration bandwidth-allocation
Link ID : Ethernet1/0
Physical Bandwidth Type0 : 0 kbits/sec
Physical Bandwidth Type1 : 0 kbits/sec
Reservable Bandwidth Type0 : 0 kbits/sec
Reservable Bandwidth Type1 : 0 kbits/sec
Downstream LSP Count : 0
UpStream LSP Count : 0
Downstream Bandwidth : 0 kbits/sec
Upstream Bandwidth : 0 kbits/sec
IPUpdown Link Status : UP
PhysicalUpdown Link Status : UP
TE CLASS CLASS TYPE PRIORITY BW RESERVED BW AVAILABLE
00 0 0 0
10 1 0 0
20 2 0 0
30 3 0 0
40 4 0 0
50 5 0 0
60 6 0 0
70 7 0 0
81 0 0 0
91 1 0 0
101200
111300
Table 411 Description on fields of the command
Field Description
LspID ID of an LSP carried on a link
In/Out IF Incoming/Outgoing interface
S/H Prio Setup and holding priorities of CR-LSP
CT Service class type
BW(kbps) Bandwidth (in kbps)
