1603
enable traffic-adjustment
Syntax enable traffic-adjustment
undo enable traffic-adjustment
View OSPF view/IS-IS view
Parameter None
Description Use the
enable traffic-adjustment command to enable IGP shortcut.
Use the
undo enable traffic-adjustment command to disable IGP shortcut.
By default, IGP shortcut is disabled.
IGP shortcut allows OSPF to include static LSP tunnels in SPF calculation and
advertise them to OSPF neighbors.
Example # Enable IGP shortcut when the IGP protocol is OSPF.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable traffic-adjustment
# Enable IGP shortcut when the IGP protocol is IS-IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] enable traffic-adjustment
enable traffic-adjustment advertise
Syntax enable traffic-adjustment advertise
undo enable traffic-adjustment advertise
View OSPF view/IS-IS view
Parameter None
LSP Number of LSP tunnels
GRE Number of GRE tunnels
CRLSP Number of CR-LSP tunnels
LOCAL IFNET Number of CE-side interfaces in MPLS L2VPN
MPLS LOCAL IFNET Number of outgoing interfaces in CCC remote mode in
MPLS L2VPN
Table 420 Description on the fields of the display tunnel-info statistics command
Field Description
