1230 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS
display bgp ipv6 routing-table
Syntax display bgp ipv6 routing-table [ ipv6-address prefix-length ]
View Any view
Parameters ipv6-address: Destination IPv6 address.
prefix-length: Prefix length of the IPv6 address, in the range 0 to 128.
Description Use the
display bgp ipv6 routing-table command to display IPv6 BGP routing
table information.
Examples # Display the IPv6 BGP routing table.
<Sysname> display bgp ipv6 routing-table
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
*> Network : 40:40:: PrefixLen : 64
NextHop : 40:40::40:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Table 290 Description on the fields of the display bgp ipv6 peer command
Field Description
Peer IPv6 address of the peer
V Peer BGP version
AS AS number
MsgRcvd Messages received
MsgSent Messages sent
OutQ Messages to be sent
PrefRcv Number of prefixes received
Up/Down The lasting time of a session/the lasting time of present state
(when no session is established)
State Peer state
Table 291 Description on the fields of the display bgp ipv6 routing-table command
Field Description
Local router ID Local router ID
