560 CHAPTER 36: BRIDGING CONFIGURATION COMMANDS
mac-address (bridge-template interface view)
Syntax mac-address mac-address
undo mac-address
View Bridge-template interface view
Parameters mac-address: MAC address, in the format of H-H-H
Description Use the
mac-address command to configure a MAC address for the current
bridge-template interface.
Use the
undo mac-address command to configure the configured MAC address
of the current bridge-template interface.
By default, if a bridge set contains Ethernet interfaces, its bridge-template
interface will use the MAC address of a random Ethernet interface. If the bridge
set contains no Ethernet interfaces, its bridge-template interface will use the
system default MAC address.
Related command: interface bridge-template.
n
Different models of devices may have different deferent system default MAC
addresses. Refer to your specific device model.
Example # Set the MAC address of the bridge-template interface of bridge set 1 to
0000-0011-0011.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] mac-address 0000-0011-0011
map bridge-group
Syntax map bridge-group broadcast
undo map bridge-group
View PVC view
Parameters None
Description Use the
map bridge-group broadcast command to enable bridging over the
current PVC.
Use the
undo map bridge-group command to disable bridging over the current
PVC.
