Filter
Top Products
Rev. 5.00, 09/03, page 394 of 760
Channels 0 and 1 TCR Bit Configuration:
Bit: 15 14 13 12 11 10 9 8
———————UNF
Initial value:00000000
R/W:RRRRRRRR/W
Bit:76543210
— — UNIE CKEG1 CKEG0 TPSC2 TPSC1 TPSC0
Initial value:00000000
R/W: R R R/W R/W R/W R/W R/W R/W
Channel 2 TCR Bit Configuration:
Bit: 15 14 13 12 11 10 9 8
——————ICPFUNF
Initial value:00000000
R/W:RRRRRRR/WR/W
Bit:76543210
ICPE1 ICPE0 UNIE CKEG1 CKEG0 TPSC2 TPSC1 TPSC0
Initial value:00000000
R/W: R/W R/W R/W R/W R/W R/W R/W R/W
Bits 15 to 10, 9 (except TCR2), 7, and 6 (except TCR2)—Reserved: These bits are always read
as 0. The write value should always be 0.
Bit 9—Input Capture Interrupt Flag (ICPF): A function of channel 2 only: the flag is set when
input capture is requested via the TCLK pin.
Bit 9: ICPF Description
0 No input capture request has been issued
Clearing condition: When 0 is written to ICPF (Initial value)
1 Input capture has been requested via the TCLK pin
Setting condition: When input capture is requested via the TCLK pin
*
Note: * Contents do not change when 1 is written to ICPF.