Filter
Top Products
Rev. 5.00, 09/03, page 333 of 760
11.2 Register Descriptions
11.2.1 DMA Source Address Registers 0–3 (SAR0–SAR3)
DMA source address registers 0–3 (SAR0–SAR3) are 32-bit readable/writable registers that
specify the source address of a DMA transfer. During a DMA transfer, these registers indicate the
next source address.
To transfer data in 16 bits or in 32 bits, specify a 16-bit or 32-bit address boundary address. When
transferring data in 16-byte units, a 16-byte boundary (address 16n) must be set for the source
address value. Operation is not guaranteed if other addresses are specified.
An undefined value will be returned in a reset. The previous value is retained in standby mode.
Bit: 31 30 29 28 27 26 25 24
Initial value:————————
R/W: R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 23 22 21 20 … 0
…
Initial value: — — — — … —
R/W: R/W R/W R/W R/W … R/W