Filter
Top Products
Rev. 5.00, 09/03, page 163 of 760
Bit 21—Break ASID Mask A (BASMA): Specifies whether the bits of the channel A break
ASID7-ASID0 (BASA7 to BASA0) set in BASRA are masked or not.
Bit 21: BASMA Description
0 All BASRA bits are included in break condition, ASID is checked (Initial value)
1 No BASRA bits are included in break condition, ASID is not checked
Bit 20—Break ASID Mask B (BASMB): Specifies whether the bits of channel B break ASID7-
ASID0 (BASB7 to BASB0) set in BASRB are masked or not.
Bit 20: BASMB Description
0 All BASRB bits are included in break condition, ASID is checked (Initial value)
1 No BASRB bits are included in break condition, ASID is not checked
Bits 19 to 16—Reserved: These bits are always read as 0. The write value should always be 0.
Bit 15—CPU Condition Match Flag A (SCMFCA): When the CPU bus cycle condition in the
break conditions set for channel A is satisfied, this flag is set to 1 (not cleared to 0). In order to
clear this flag, write 0 into this bit.
Bit 15:
SCMFCA Description
0 The CPU cycle condition for channel A does not match (Initial value)
1 The CPU cycle condition for channel A matches
Bit 14—CPU Condition Match Flag B (SCMFCB): When the CPU bus cycle condition in the
break conditions set for channel B is satisfied, this flag is set to 1 (not cleared to 0). In order to
clear this flag, write 0 into this bit.
Bit 14:
SCMFCB Description
0 The CPU cycle condition for channel B does not match (Initial value)
1 The CPU cycle condition for channel B matches