Filter
Top Products
Specifications
1–26
AM700 Audio Measurement Set Service Manual
Table 1–17: Electromagnetic compatibility (cont.)
Capabilities Description
EMC requirements
Immunity, Fast Transients, Common Mode IEC 801-4 1988
No loss of stored data, change to control settings, degradation of
performance, or temporary loss of function will occur when the instrument
is subjected to transients as described below.
Port Peak (kV) Tr/Th (ns) Rep Frequency (kHz)
Signal & Control 0.5 5/50 5
DC Power 0.5 5/50 5
AC Power 1.0 5/50 5
FCC The instrument complies with the radiated and conducted emissions
requirements of FCC 47 CFR, Part 15, Subpart B, for Class A equipment.
To ensure compliance with the above requirements, only high-quality
shielded interface cable should be attached to this instrument. High quality
cable is described in the Emissions Specification.
Table 1–18: Mechanical characteristics
Capabilities Description
Standard instrument
Weight (nominal)
CRT Display Instrument
Instrument by Itself 32.25 lbs (14.66 kg)
With Front Cover and Accessories 34 lbs (15.45 kg)
Domestic Shipping Weight (with shipping box,
including instrument, manuals, foam, and snap-on
cover. Optional service manual not included.)
45 lbs (20.454 kg)
LCD Flat Panel Display Instrument
Instrument by Itself 30.62 lbs (13.92 kg)
With Front Cover and Accessories 32.38 lbs (14.72 kg)
Domestic Shipping Weight (with shipping box,
including instrument, manuals, foam, and snap-on
cover. Optional service manual not included.)
43.37 lbs (19.71 kg)
Shipping Box
Length 28 in (711.2 mm)
Width 23 in (584.2 mm)
Height 19.5 in (495.3 mm)
Volume 7.3 cubic feet (0.207m
3)