Filter
Top Products
Operating Information
2–28
AM700 Audio Measurement Set Service Manual
Quick Setup
One of the configuration choices is the Quick Setup selection. Under this
selection is a set of application specific setups that can be used to quickly make
the needed instrument configuration changes for an often used measurement
setup. Figure 2–23 shows the selection screen with the Audio Analyzer
selections; Table 2–1 gives the application-specific choices and the views that
the selection produces. In the table, those views in parentheses are available but
not displayed. To do a quick setup, touch the measurement you want to make.
When the setup has finished, the selection screen is exited. If you want to exit
the screen without making a selection, press the Clear Menu button.
Figure 2–23: Quick setup selections for the Audio Analyzer
Table 2–1: Quick setups by application
Application Measurements
Views displayed
(views available but not displayed)
FFT Analyzer FFT Analysis FFT1: Channel 1
FFT2: Channel 2
Multitone Level Measurements Meas1: Level Ch1
Meas2: Level Ch2
Meas3: Level Diff Ch1 –> Ch2