Filter
Top Products
Diagnostics
AM700 Audio Measurement Set Service Manual
6–15
Because a rigidly formatted output excludes much useful information, any main
or sub-result line can have associated with it one or more lines of indented
commentary. Whereas sub-result lines are indented one level of indentation from
their associated main results, comments will be indented two levels from their
associated main results, whether they are actually associated with the main result
or the sub-result.
Accessing the Diagnostics Menus
Figure 6–4: Entering the user-interface diagnostics
An overview of the AM700 Diagnostics Menus is shown in Figure 6–5. As
previously mentioned, there are two ways to access the Low Level diagnostics
menu. With the AM700 running, the diagnostic menu is displayed through the
Other Applications menus. Press the Other front-panel button to display the
application selection menu shown in Figure 6–4. Use the large control knob to
highlight the Diagnostics application; then, touch the Run Application soft key.
The diagnostic operation begins with the High Level Diagnostic Interface Main
Menu shown in Figure 6–6. In this menu, use large control knob to highlight the
“R” (Instrument Run Modes menu) and press the Select button.